Consider this before replacing an old concrete slab. Concrete floors are generally 4 inches thick or more. With the majority of surface issues, aside from cracks, being less than one…
Garage floor resurfacing in Ottawa can completely revamp and modernize the look of your garage. No matter how oil stained, pitted, or abused your garage floor is, you can easily correct all its flaws and make it look brand new. It’s not a very difficult project to do and your new floor would be ready to use in no time. If you follow the steps listed below, your garage surface will have a perfect finish.
Your first step should be to evaluate the surface and make sure it’s sound. If the concrete surface isn’t firm and durable, resurfacing will only damage the concrete floor further. If you have any large cracks or dents in the concrete, you should repair it before you resurface it. The process is simple and doesn’t take too much time. You need a perfectly even surface for your concrete floor finish to look attractive.
The surface needs to be absolutely free of dust and debris before you apply the resurfacer. You can use a garden hose with sufficient pressure or a pressure washer to clean the surface thoroughly. You would need at least 3,500 psi of water pressure to clean the floor well. Any stains, oils, paints, and chemical stains should also be removed from the surface.
Once the surface is prepared, mix once bag of resurfacer at a time. We recommend that you mix with cold water in warmer temperatures and with warm water in cooler temperatures. You should let the mixture rest for a few moments, mix it thoroughly again until it’s syrupy in texture.
It’s a good idea to be organized and have all your tools at hand before you apply the resurfacer. Make sure that the floor is clean before you pour the mixture on one section of it and spread it quickly with a long-handle squeegee. This will ensure that the resurfacer spreads evenly across the surface. Make sure that you scuff the surface with a broom to add a little more texture. This will ensure the floor isn’t too slippery.
After all, the resurfacing process needs to cure for at least 8 to 24 hours before you use it. If you have any questions about garage floor resurfacing in Ottawa or want a free, no-obligation estimate, give us at Custom Concrete Floors a call at 613 327 9127. You can also fill in this contact us form and we’re reply as soon as possible.
Consider this before replacing an old concrete slab. Concrete floors are generally 4 inches thick or more. With the majority of surface issues, aside from cracks, being less than one…
Don't tear it out! At least, not until you have your concrete slab evaluated by a professional concrete worker.There are so many times you'll come across a concrete surface that…
It’s a common misconception that if there are cracks in a concrete surface, you need to replace the slab entirely. Sometimes, an expert might recommend that you replace a large…
Regardless of how drab and old your driveway, patio, paver or any other concrete flooring has become, it’s possible to give it a new lease of life. Here are some…
The garage floor sees a lot of traffic and it’s also one area that people didn’t really pay much attention to up until recently. Today, people want to add the…
No comments